Pistol Builds and Upgrades

RS1 Recoil Spring is made of high strength spring steel. Its short length design with 2 different tensioned coil zone can enhance the efficiency of recoil cycling. Also it can improve the recoil control and make easier handling on blow back cycling.The RS1 Recoil...

This is our general rate for services that can’t be categorized into any of the other tech services that we offer. This is also the minimum fee that will be applied to any AEG that requires us to open the gearbox. Please note that...

Works with Marui G17Oil resistant and high efficiency upgrade part for durability and consistent performance. Works with Marui G18C, G17 RMR slide , and Marui Strike WarriorOil resistant and high efficiency upgrade part for durability and consistent performance. Works with Marui G19Oil resistant and...

For TM Hi-Capa, 1911 series, M45A1 & V10NP1 Nozzle Spring by CCT was made by high quality spring steel. Its special design is able to supply an addition tension during cycling and enhance the durability. It can make sure the nozzle movement stable and workable....

Metal thread adapter for the Action Army AAP-01C. Replaces the orange thread adapter pre-installed from the factory.

AAP01 200% Nozzle SpringHighlighted featuresThe AAP01 nozzle spring was made by high quality spring steel. Its special design is able to supply an addition tension during cycling and enhance the durability. It can make sure the nozzle movement stable and workable. It provide 200% power...

Trident Sear Spring was made by high electrical spring steel which provide lighter and much crispy trigger pull feeling. Its enhancing design that narrow down the contact surface to reduce friction with other components. The durable material and enhanced design drive a consistent and rapid trigger...

AAP01 150% Recoil SpringHighlighted featuresAAP01 Recoil Spring is made of high strength spring steel. Its short length design with 2 different tensioned coil zone can enhance the efficiency of recoil cycling. Also it can improve the recoil control and make easier handling on blow...

The Action Army AAP-01 CNC upper receiver is a drop-in upgrade designed to add picatinny rail on the top and bottom for the mounting of lights, lasers, and optics.  The built-in iron sights are also slightly raised for easier tracking.  Compatibility:  Action Army AAP-01...

AAP01 Guide Rod SetHighlighted features6061 Aluminium material with CNC machined2 Aluminium buffers for modification to shorten the cyclingInclude Enhance 150% Recoil SpringEnhance the reaction force to speed up the blowback cycle5 Colors available: Silver, Black, Gold, Red & RainbowFor Action Army AAP01**Important Notice**It may...

AAP01 Enhance Plastic Nozzle SetHighlighted featuresInjection molded polymer constructionDesigned and recommended for advanced playersHigh impact resistanceSuperb performance, air seal and durabilityThe vale pin lock is more durable and stable than the traditional designUse a new generation non-rotating valveIncluding plastic nozzle valve, valve spring, nozzle,...

Action Army AAP01 Picatinny Rail Set 20mm ( AAP-01 ) Material: Polymer

⚡ Why PTX? Precision. Reliability. Instant response. The GATE PTX isn’t just a sidearm — it’s a compact, high-performance SMG in pistol form. For the first time in airsoft history, a compact pistol features a fully factory-integrated electropneumatic HPA engine: the PULSAR S2. Designed as...

Action Army Folding Stock for AAP-01

Original option parts for AAP-01 Aluminum 6061 CNC

Enhanced stainless steel recoil guide rod or Marui G19 with 150% spring for improved recoil.CNC Stainless SteelIncludes 4 pcs CowCow M6 rubber buffers, allows user to fine tune slide cycling.Buffers provide shock absorption to protect the slide against the frame rails.

Customize your SSP5 to the max with these CNC-machined coloured outer barrels! They have been manufactured in limited quantities, meaning you will almost certainly attract people’s gaze. It is not compatible with the 4.3″ & 5.1″. If you’re looking for the 6″ black spare part, check out...

→ Thumbscrew + Set screw→ Fine pitch threads→ CNC nub plate→ Comes with drill jig ⚠ Compatible only with stock hop-up chamber⚠ Included drill jig works only with original AAP-01 / AAP-01C upper This TDC kit for AAP01 replaces the stock hop-up adjustment mechanism with a screw that pushes down on a custom CNC nub plate. Compared to...

The PTS ZEV Combat Sight Set comes with plain black rear sights and a bright fiber front sight. This combination gives a shooter a clear picture and easy pickup of the front sight to get shots on target faster and more confidently under all lighting conditions. Also,...

B01 Blowback Housing is precision CNC machined from aluminum 7075 for ultimate durability and quality. Weighing in at just 18 grams, this blowback housing will improve the cycling action as well as gas tranmission. Also, the special design on piston head can let the O-ring...

Do you dream of a pistol build that offers performance, reliability, and gas efficiency? Maybe you have a G17 or a Hi-Capa you want to turn into your main for CQB, but you don’t know how to get it there. BBA will build you...

Improve the look of any threaded barrel handgun with this sleek compensator While designed to complement the CZ P-09 OR , this sturdy screw on Compensator will fit on to most replicas with a 14mm threaded CCW outer barrel.  Other replicas such as our...

CCT 3L HopUp Chamber was constructed by aluminum 7075 with CNC machined. Its lightweight design and redesigned structure can provide extra support to the lower part of chamber. 3 "L" design drive a better accuracy and consistency with high durability and reliability which are...

Customize your SSP5 to the max with these CNC-machined coloured magwells gen2! They have been manufactured in limited quantities, meaning you will almost certainly attract people’s gaze. Made to specifically be compatible with the HPA Magazine Adapter – Hi-Capa it is used for faster and smoother reloads. Colors may differ between...

Tactical G TriggerHighlighted featuresAluminum 6061 material with CNC machinedFlatter and Slender trigger designChoice of 3 trigger safety plates (Black, Gold & Red)Adjustable pre-travel system3 Colors available: Silver, Black & GoldCompatible to all TM G-Series Gas Blowback Pistol, TM G17 Gen4, AAP01 and TM G19...

Transform your SSP18 or SSP28 into the lightest GBB SMG. This functional body kit allows the mounting of full-size optics without worry for zero shift with the durable aluminum chassis. This body kit remains compact & affordable with all the features expected from a carbine kit. Use it with the TDC Outer Barrel to be able...

Steel hammer upgrade part for the AAP-01 airsoft pistol.

Action Army Mag Extend Grip for AAP-01

Action Army CNC Adjustable Flat Trigger for AAP-01 Color: Black / Red

AAP01 Enhance Piston Head V2Highlighted featuresEnhanced Piston Head for Air-Tightness.Designed to withstand high impact pressure.More Stabilized Performance.More durability over TM piston headHigh quality anti-oil rubber materialFor AAP01**Important Notice**It may has a condition that your pistol cannot feed the BB bullet due to lightweight gas...