-
-
SHS / RA Extreme High Speed AEG Gear Set (12:1 / 13:1 / 32:1)
Oem'd by SHS / Rocket Airsoft New Gen4 version, with 10 teeth bevel gearAffordable gearset for high speed setups12:1 or 13:1 or 32:1 gear ratioFeatures hardened steel material Please note that 32:1 gear sets will require the use of a half rack piston...- $29.95
- $29.95
- Unit price
- per
-
BCA Gen. 2 High Performance AEG Motor (22TPA) (Long Axle / Short Axle)
BCA 22 TPA neodymium magnet high torque motor is fantastic for those seeking to optimize performance on mid-priced builds. Typically, those seeking to balance performance with cost would use SHS 12:1 and 13:1 gear sets, which pair extremely well with SHS and ZCI motors...- $54.95
- $54.95
- Unit price
- per
-
BCA Gen. 2 High Performance AEG Motor (28TPA) (Long Axle / Short Axle)
BCA 28 TPA neodymium magnet extreme torque motor is a game-changer for those seeking to optimize performance on mid-priced builds. Typically, those seeking to balance performance with cost would use SHS 12:1 and 13:1 gear sets, which pair extremely well with SHS and ZCI...- $54.95
- $54.95
- Unit price
- per
-
BCA Welded Steel AEG Gear Set (13:1 / 12:1)
The new BCA Welded Steel Gear Set is an improvement upon traditional 13:1 offerings in that the bevel gear and step gear are welded together, as opposed to being press fit like other brands. One of the most common failures from older 13:1 gear...- $44.95
- $44.95
- Unit price
- per
-
SHS/RA High Torque Motor (Long Axle / Short Axle)
*Motor colour may differ between batches. Internals are all the same.* Balanced armature winding with strong neodymium magnets,18 TPA. Made for a lot of power! Use with 350+ fps AEGs.- $49.95
- $49.95
- Unit price
- per
-
ASG INFINITY CNC U-18000 Motor (Long Axle / Short Axle)
Description The Infinity CNC 18000 motor was created after continued requests from airsoft technicians asking for a super torque option in our motor lineup. The 18000 motor is the world's first airsoft motor that combines 28 TPA with high-strength neodymium magnets inside precision CNC-machined...- $99.95
- $99.95
- Unit price
- per
-
Warhead Industries Brushless CNC Black AEG Motor - Long Shaft (Standard / High Speed / Ultra High Speed)
The Warhead Aeg Brushless motor is the ultimate upgrade for you aeg. Operating voltage - 7.2v - 11.4v (2 to 3 cell lithium polymer battery) Brushless DC motors have no brushes to get worn out, they represent a huge leap forward in technology. Brushless output...- $209.95
- $209.95
- Unit price
- per
-
Siegetek Revolution High-speed Gear Set w/ Pinion Gear (10.44:1 / 14.09:1)
("O" Pinion Gear Included) 4 gears in total. Siegetek gears are the best gears on the market. Period. Barring extreme user error, they are pretty much indestructible. We've installed hundreds of sets without a single failure. All components are CNC machined out of chromium-molybdenum...- $264.95
- $264.95
- Unit price
- per
-
SHS Sector Gear Delayer Clip (Plastic)
Got a high ROF gun but you have misfeeding issues? Chances are you need a sector gear delay clip.This clip attaches to your sector gear post so that the tappet plate is held back for a longer period of time during your gearbox stroke,...- $4.95
- $4.95
- Unit price
- per
-
BCA Gen. 2 High Performance AEG Motor (18TPA) (Long Axle / Short Axle)
BCA 18 TPA neodymium magnet balanced motor is a fantastic general purpose motor upgrade. These can be installed into most stock guns to instantly improve trigger response. These 18 TPA motors pair extremely well with SHS gear sets for budget-friendly high speed builds. Gen. 2 improvements include...- $54.95
- $54.95
- Unit price
- per
-
ASG INFINITY CNC U-22000 Motor (Long Axle / Short Axle)
Description The Infinity CNC 22000 motor was created after continued requests from airsoft technicians asking for a super torque option in our motor lineup. The 22000 motor is the world's first airsoft motor that combines 22 TPA with high-strength neodymium magnets inside precision CNC-machined externals. With...- $99.95
- $99.95
- Unit price
- per
-
BCA Reinforced Motor Spade Connector
Industrial grade spade connectors, also known as motor tabs and motor connectors. These are significantly more durable than spade connectors commonly found in airsoft. Package contains Pair of 2 connectors.- $4.95
- $4.95
- Unit price
- per
-
-
ACE1ARMS Delayer type B (6pcs)
Sector delay clips attach to the sector gear and pull the tappet plate back for a longer period of time, which allows more time for the BB to feed properly into the chamber. Recommended for guns shooting above 25 rounds per second.- $4.95
- $4.95
- Unit price
- per
-
BCA CNC High Performance AEG Motor (28TPA) (Long Axle / Short Axle)
New CNC motor offering from BCA. All new CNC housing design offers excellent durability and longevity, while having improved airflow, heat dissipation, and efficiency due to ventilation cutouts and ribbing. BCA 28 TPA neodymium magnet extreme torque motor is a game-changer for those seeking...- $69.95
- $69.95
- Unit price
- per
-
Tienly GT25000 Ultra High Torque Motor (Long Axle / Short Axle)
The new product of 2017! 25000RPM at 7.4v Lipo with Zero Load. 22TPA Armature and neo-Magnet. Extremely High Torque for any high-speed gear sets(10.44:1 Siegetek Friendly). Optimized Power Efficiency. Allows you to get more shots out of same battery. Hand wound motor using the...- $89.95
- $89.95
- Unit price
- per
-
Tienly GT-30000 Ultra Torque Motor (Long Axle / Short Axle)
18TPA Armature and neo-Magnet. High Torque for any high-speed gear sets(10.44:1 Siegetek Friendly). Hand wound motor using the best materials, well balanced and energy efficient, side air vents provide maximum cooling efficiency.Improves trigger response and rate of fire, suitable for springs up to M170...- $89.95
- $89.95
- Unit price
- per
-
ASG INFINITY CNC U-30000 Motor (Long Axle / Short Axle)
The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the...- $99.95
- $99.95
- Unit price
- per
-
BCA CNC High Performance AEG Motor (22TPA) (Long Axle / Short Axle)
New CNC motor offering from BCA. All new CNC housing design offers excellent durability and longevity, while having improved airflow, heat dissipation, and efficiency due to ventilation cutouts and ribbing. BCA 22 TPA neodymium magnet high torque motor is fantastic for those seeking to...- $69.95
- $69.95
- Unit price
- per
-
Prometheus Triple Torque Helical Gearset (26.43:1)
Helical cut gears can provide better efficiency and less wear over time. The improved contact surface also improves noise signature when shimmed properly. Please ensure that the gears are professionally installed as the added axial load makes the gears more sensitive to shimming than...- $129.95
- $129.95
- Unit price
- per
-
Tienly GT-35000 Ultra Torque Motor (Long Axle / Short Axle)
16TPA Armature and neo-Magnet. High Torque for any high-speed gear sets(10.44:1 Siegetek Friendly). Handmade motor using the best materials, well balanced and energy efficient, side air vents provide maximum cooling efficiency.Improves trigger response and rate of fire, suitable for springs up to M160 ...- $99.95
- $99.95
- Unit price
- per
-
Warhead Industries Brushless Base AEG Motor - Long Shaft (20K / 27K / 35K / 45K)
INFORMATION Warhead Base Motor Speed 20k / 27K / 35K / 45K RPM at 11.1v (approx) Case Material - Aluminium Cast Pinion gear included. The Warhead Base Motor is deisgned to be an entry to brushless technology in airsoft. Please see the differences...- $169.95
- $169.95
- Unit price
- per
-
Warhead Industries Brushless CNC Black AEG Motor - Short Shaft (Standard / High Speed / Ultra High Speed)
The Warhead Aeg Brushless motor is the ultimate upgrade for you aeg. Operating voltage - 7.2v - 11.4v (2 to 3 cell lithium polymer battery) Brushless DC motors have no brushes to get worn out, they represent a huge leap forward in technology. Brushless output...- $209.95
- $209.95
- Unit price
- per
-
Modify Stainless Steel Shims Advanced Version
These are smaller in diameter than regular shims, great for fine tuning shim jobs20 pc set10X 0.1mm10X 0.15mm- $7.95
- $7.95
- Unit price
- per
-
LCT PK-126 Ver. 3 Gearbox Motor Mount
For LCT AEG Ver. 3 gearbox except VAL / VSS / SR-3 / SR-3M.- $14.95
- $14.95
- Unit price
- per
-
T238 CNC High Torque 33000 RPM Brushless Motor (Long Shaft / Short Shaft)
HIGHLY EFFICIENT. DURABLE AND RELIABLE. ✔Motor body material: CNC Aluminum precision machining ✔Motor gear: D type ✔Brushless, low heat at high output ✔Long service life, battery temperature ✔Emergency stop after power failure, no buffer, stable output ✔Overheat protection, low voltage protection, locked rotor protection...- $144.95
$164.95- $144.95
- Unit price
- per
-
Lonex Sector Gear Delayer Clip
Got a high ROF gun but you have misfeeding issues? Chances are you need a sector gear delay clip.This clip attaches to your sector gear post so that the tappet plate is held back for a longer period of time during your gearbox stroke,...- $4.95
- $4.95
- Unit price
- per
-
Prometheus EG 13:1 High Speed AEG Gearset (Wide Use)
●Higher Semi-Auto response!●Wide Compatibility Models!●Cleared 30,000 shots durability performance test! PROMETHEUS Gear set for standard AEG Gearbox.LayLax has modified the material and the design based on our previous models of Prometheus gear sets.The shape and dimension have been finely adjusted, and are compatible with...- $119.95
- $119.95
- Unit price
- per
Gears and Motors
Sidebar
Categories
- Custom Gun Builds
- Electric Guns
- Gas Guns & Sniper Rifles
- HPA Systems & Accessories
- Internal Parts
- Accessories
- Supplies
- Combat Gear
- Tech Services
- 3D Printing
- New Arrivals
- Choosing a selection results in a full page refresh.