Under $100

Note: Gun side (male) QD is NOT included. We know it's in the picture. Sorry! Good for use to convert your setup into dual-output.  If you need a standard QD line, please click HERE.  

220RD Capacity Articulating Follower Sure Grip Design Dot Matrix Numbering System bottom plate  

RA-Tech NPAS Kit WE Open Bolt System Improve air flow and featured adjustable FPS

  PRODUCT OVERVIEW MIL-PRF-32432 Ballistic Rating (Stop Jagged Steel Projectile at 650 fps) ANSI Z87+ High-Velocity Rating (Stop Steel Ball at 150fps)   Test -Rem 870 Tactical w/18.7-inch Barrel, Standard Choke -Winchester 12G Target Load Ammo -15yd Distance   Result Zero penetration on the...

The Venture Gear Tactical Hook & Loop Impact gloves provide a greatly increased layer of protection for those demanding and rugged environments such as shooting sports, military, law enforcement or maintenance and repair. Precision fit + flex material ensures a comfortable and tailored-like fit,...

The Venture Gear Tactical Slip On gloves provide an extra layer of protection for those demanding and rugged environments such as shooting sports, military, law enforcement or maintenance and repair. The precision fit + flex material ensures a comfortable fit, with breathable and moisture...

The Venture Gear Tactical Hook & Loop gloves provide an extra layer of protection for those demanding and rugged environments such as shooting sports, military, law enforcement or maintenance and repair. The precision fit + flex material ensures a comfortable fit, with breathable and...

Specially designed for V2G Plus goggle to fit a variety of prescription lens options. Secures in the inner side of the V2G Plus frame. Extremely lightweight for comfort. Includes micro-fiber storage case for protection. Take insert to local optometrist for Rx lens installation.

Can only be shipped by UPS Standard Designed for all gas blowback airsoft pistols and rifles Special premixed formula with silicon lubricant to keep O-rings lasting longer Low Odor 390g ± 5%  Made in Taiwan Specification: 1. Powerful 2. Silicone added 3. Low odor 4. Never...

The ZEV V2 PRO Compensator was developed and optimized for use on the G19 but will fit and function on all Glock models with a corresponding threaded barrel. Due to its compact size, when installed on a G19 with ZEV threaded barrel, it has...

The PTS Zev Technologies PRO Mag-well is designed for the professional shooter thatis looking for the competitive edge of a mag-well without the bulk of a race gun andcomfortable for close to body or conceal everyday carry. The mag-well is slightly flaredat the base...

The PTS ZEV Combat Sight Set comes with plain black rear sights and a bright fiber front sight. This combination gives a shooter a clear picture and easy pickup of the front sight to get shots on target faster and more confidently under all lighting conditions. Also,...

SpeedQB has partnered with PTS Syndicate to combine style and dependable, competition-tested function to create the SpeedQB X PTS EPM midcap for the Airsoft M4 platform. The bright, sporty hues add accent colors to your loadouts and allows for high visibility, making for easy...

Disclaimer: This product is for airsoft, training, and simulation purposes only. Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury. PTS will not accept any responsibility or liability for misuse of this product. US PALM is...

This product is a PTS licensed replica for airsoft, training, and simulation purposes only. Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury. PTS will not accept any responsibility or liability for misuse of this product....

This product is a PTS licensed replica for airsoft, training, and simulation purposes only. Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury. PTS will not accept any responsibility or liability for misuse of this product....

This product is PTS Licensed Airsoft Replica for airsoft, training, and simulation purposes only. Utilizing Airsoft products improperly, including in real firearm applications, are potentially dangerous and may cause serious injury. PTS will not accept any responsibility or liability for misuse of this product....

The PTS TPM-AR Magazine (AEG) is a 150 bb capacity midcap magazine for airsoft AR type electric guns.  The magazine features a smoked translucent reinforced polymer body that can withstand rough field conditions and allow for easy visual identification of remaining rounds inside the...

The PTS TPM-AK Magazine (AEG) is a mid-cap magazines for airsoft AK type electric guns. The magazine features 155 bb capacity, a translucent reinforced polymer body that can withstand rough field conditions and allow for easy visual identification of remaining rounds inside the magazine. It also...

  The PTS Enhanced Pistol Shockplate - G for Tokyo Marui airsoft pistols are specifically designed to reduce shock to the magazine if dropped thus prolonging the life of the magazine. The overmolded design made from DuPont™ Zytel® Polymer and TPU rubber equates to...

Available in Medium and Large size sets The PTS SAPI Dummy Plates is an ideal alternative to your heavier and harder standard dummy plate. Designed solely for Airsoft and Milsim purposes, the plate has been carefully constructed to ensure flexibility and lightness - enabling you to...

  The PTS Radian Raptor-LT™ Charging Handle is the latest iteration of the revolutionary patented ambidextrous charging handle introduced by Radian Weapons several years ago. The PTS Raptor-LT shaft is precision machined from 6000 series aluminum with black anodized finish. The charging handle wings’...

The PTS Radian Raptor-LT™ Ambidextrous Charging Handle is the latest iteration of the revolutionary patented ambidextrous charging handle introduced by Radian Weapons several years ago.  The charging handle shaft is made from die-cast zinc alloy and the wings’ aluminum skeleton is over-molded with PTS’s customary Reinforced Polymer for...

The PTS MP7 51T Flash Hider is made to PTS's superior quality standards with high-quality steel and a real steel finish that is scratch and weather-resistant like a real gun flash hider. It is compatible with the KWA MP7 GBB and the VFC MP7...

PRODUCT DESCRIPTION 51T Flash Hider included. The PTS MK18 Quick Detach mock suppressor is a faithful replica of a similar silencer that is issued to the US Navy SEALs and other US and international Special Operations Units.  Its compact size allows for uncompromised maneuverability without...

The EPM1-RX is a slight revision of the venerable but still industry-leading PTS EPM1 250 round midcap magazine. The primary revision is brand new tooling for the internal shell which leads to more precise dimensions and a smoother bb channel. The EPM1-RX internal shell...

  The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways: The EPM1 is the First collaborative development between PTS and Odin...

  The PTS EPM1-S AEG magazine, made with the same technology as our EPM1, is a 20R length short M4 magazine that holds an incredible 170 round bb capacity and offers the same reliability that all PTS magazines have long been famous for. It...

  The venerable PTS® Enhanced Polymer Magazine AEG has been slightly revised for 2023.  It retains all of the same features and technologies of the original EPM: Capacity: The EPM retains its 150round capacity and its legendary feeding consistency and reliability. Dupont Zytel polymer...

  The PTS Low Profile QD Sling Swivel - S is the improved version of the original PTS Low Profile QD Sling Swivel. The D loop on Type S swivel is moved a bit downward and slimmer in size to protrude less and take up...