Everything excluding guns and Route

Trident Sear Spring was made by high electrical spring steel which provide lighter and much crispy trigger pull feeling. Its enhancing design that narrow down the contact surface to reduce friction with other components. The durable material and enhanced design drive a consistent and rapid trigger...

Rat-tail style pressure pad. 

The complete kit for the EVO with Midcap use - all three components in one package. 19330: EVO ATEK HandguardThe drop-nose styling of the EVO SMG is retained and built upon with the ATEK. A positive “thumb- over-bore” grip is facilitated by a natural...

FEATURES Synthetic leather palm for durability and tactility Breathable stretch material on the back of the hand  Crosshatched Silicon grip areas on the palms  Reinforced trigger finger

3D printed 6mm mandrel that we use for checking feed tube alignment in Daytona Systems and as a cutting mandrel for RHop installations.  *Price for one unit.

DISCLAIMER: THIS PRODUCT IS FOR AIRSOFT, TRAINING, AND SIMULATION PURPOSES ONLY.  UTILIZING AIRSOFT PRODUCTS IMPROPERLY, INCLUDING IN REAL FIREARM APPLICATIONS, ARE POTENTIALLY DANGEROUS AND MAY CAUSE SERIOUS INJURY.  PTS WILL NOT ACCEPT ANY RESPONSIBILITY OR LIABILITY FOR MISUSE OF THIS PRODUCT.   The Griffin Armament M4SD...

High-performance Lithium Ion battery, fits in most M4 buffer tubes, can also fit inside most stocks with battery compartments. 11.1 Volts 2300 MilliAmp-hour capacity 15C Discharge (Equalized to 30c 1100mah 11.1v Battery) Dimensions: 80mm x 9mm   There are many advantages of using Li-Ion batteries,...

High performance 2 cell Lithium Polymer battery, fits in most M4 buffer tubes, can also fit inside most stocks with battery compartments. 7.4 Volts 1100 MilliAmp-hour capacity 20C constant Discharge Dimensions: 100mm x 20mm x 5mm per panel

Aerosol Can Can't be shipped Outside of North America!! Please select UPS for shipping as Canada Post does not accept compressed or flammable gases. We apologize for the inconvenience. Best Lubrication for your Daytona system, gas blowback system, real steels and so much more! Stop...

Neo-Magnet. Extremely High Speed for High Ratio gear. (Not designed for Hi-Speed Gear set, check out GT25000 or GT30000 Hi-Torque Motors). Hand wound motor using the best materials, well balanced and energy efficient, side air vents provide maximum cooling efficiency.Improves trigger response and rate...

Removable Thread Adhesive Vibration is the worst enemy of fasteners. Every airsoft gun, including springers will vibrate under operation. Therefore, it is very important to utilize thread lockers on fasteners which retain critical components and expensive accessories! Upon curing, the 4UANTUM LOCK thread adhesive...

The new GBB Green Gas magazine by G&G designed for use with the STP45 series pistol. Featuring a 30 round capacity.

Features Lightweight and durable injection molded polymer construction Easy to install Great for loading multiple magazines in a short amount of time Adapter fits most popular MWS M4 series Airsoft GBB magazines Manufacturer: Likisei Specifications: Compatibility: For use in the EMG Odin Innovations Sidewinder M12 Speedloader...

Features Slightly narrow entrance for better sealing to achieve more consistent power output Special pressure point geometry reduces inconsistency between shots for more predictable trajectory and longer distances Suitable for Maple Leaf Crazy Jet barrels Works with Crazy Jet barrels and standard AEG hop-up...

Manufacturer: CYMASKU: CYMA-M195 / CYMA-M195A Polymer magazine shell 110 Rounds mid capacity magazine Suitable for SR25 CM.098 AEG series

Combat shirt designed for action. The mix of durable material on the arms with the stretchable material allows for ease of movement and durability. Features Pockets for elbow pads. Size adjustable with straps Arm pockets. Velcro straps for patches.  65% Polyester / 35% Cotton.  Wash at 30C° –...

For LCT VZK-MSU / LCK-74MN / LCKS-74M / STK-74 / LCK-104 / LCK-105 / LCKS-74 / LCKS-74UN / PP-19-01 / LCK-106 / TK-105 / TK-102 / TX-S74UN / ZKS-74M / ZK-104 / ZKS-74UN / ZP-19-01 .For GHK GBB: GKS74U / GK74MN / GK105 GBB

The PTS Dead Air series of muzzle devices are fully compatible with our PTS Dead Air silencers with the PTS Keymo attachment such as the PTS Dead Air Sandman series of silencers and tracers. These multiple muzzle device styles will allow you to customize...

Better cycling and recoil.

The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the...

Features: High Strength Stamped Steel Shell & Casing Automatic winding. 5000 round capacity. High Strength Polymer Internal Feed System Easy-Lock Latch System Integrated Carrying Strap Nylon carrying handle.

For LCK-74 / LCK-74M / LCKS-74 / LCKS-74M / LCK-74MN / STK-74 / G-03 / G-03M / ZKS-74M / LCKM / LCKM (Stainless Steel) / LCKMS / LCKM Economy / LCKMMS / AIMS / TIMS / TKMS / LTS-Keymod 13.5 / MRK-74/ M-LOK LCKMLCK-104...

Knight's Armament-style picatinny rail covers. Set of 4 in black or tan.

OEM LCKMSU wooden lower handguard. For LCT LCKMSU / LCKS-74UN / LCK-106 / VZK-MSU / ZKS-74UN / TX-74UN / TX-S74UN

- Multi-Color Flame Effect.- Intelligent Power Control.- Compatible with green tracer BBs and Gel Balls.- USB Type-C Port for Charging. Note: does NOT come with threads.   

  Made from high strength spring steel Provides snappier recoil impulse Improved durability and performance

A new 1500 round capacity drum magazine designed for use with MP5 style AEGs. A rotary wheel is used for winding. 

★ Notable Efficiency: The Solink brushless motor is remarkably efficient.Even After firing 200 rounds of BB bullets, it still operates at a temperature approximately 10 degrees cooler than most brushed motors, keeping it cool like never before.That means that these magnets inside the motor...